Show simple item record

dc.contributor.authorHeal, Mathew Ren
dc.date.accessioned2008-11-03T10:09:57Z
dc.date.available2008-11-03T10:09:57Z
dc.date.issued2008
dc.identifier.citationHeal, M.R. (2008) The effect of absorbent grid preparation method on precision and accuracy of ambient nitrogen dioxide measurements using Palmes passive diffusion tubes, Journal of Environmental Monitoring 10, 1363-1369. doi:10.1039/b811230d
dc.identifier.urihttp://dx.doi.org/10.1039/b811230d
dc.identifier.urihttp://hdl.handle.net/1842/2533
dc.description.abstractA few studies have suggested that the precision and accuracy of measurement of NO2 by Palmes-type passive diffusion tube (PDT) are affected by the method of preparation of the triethanolamine (TEA) absorbent coating on the grids. Theses studies have been quite limited in extent and have tended to evaluate PDT accuracy as zero bias between PDT NO2 value and the exposure-averaged NO2 determined by co-located chemiluminescence analyser. This ignores the well-documented intrinsic systematic biases on PDT-derived NO2, such as within-tube chemistry and exposure-duration nitrite loss, which may lead to non-zero bias values irrespective of effects of TEA absorbent preparation method on PDT accuracy. This paper reports on a statistical analysis of a large dataset comprising 680 duplicated PDT exposures spanning 146 separate exposures periods, spread over 5 urban exposure locations and a number of years. In each exposure period, PDTs prepared by between four and six different grid preparation methods were simultaneously compared. The preparation methods used combinations of the following: acetone or water as the TEA solvent; 20% or 50% as %TEA in the solution; and application of TEA solution by dipping grids for several minutes in the solution before drying and tube assembly, or by pipetting 50 µL of solution directly onto grids already placed in the PDT cap. These represent the range of preparation procedures typically used. Accuracy was evaluated as maximised nitrite capture within an exposure. Data were analysed by General Linear Modelling including examination of interaction between different aspects of grid preparation method. PDT precision and accuracy were both significantly better, on average, when the PDT grids were prepared by dipping in TEA solution, and neither solvent or %TEA used for the dipping solution were important. Where PDT preparation by pipetting TEA solution onto grids is to be used, better performance was obtained using 20% TEA in water. A systematic positive bias in PDT measure of NO2, consistent with within-tube oxidation of NO to NO2 and independent of preparation method, was again evident in this work.en
dc.format.extent306688 bytesen
dc.format.mimetypeapplication/msworden
dc.language.isoen
dc.publisherRoyal Society of Chemistryen
dc.subjectphysical chemistryen
dc.subjectNO2en
dc.subjectpassive diffusion tubeen
dc.titleThe effect of absorbent grid preparation method on precision and accuracy of ambient nitrogen dioxide measurements using Palmes passive diffusion tubesen
dc.typeArticleen


Files in this item

This item appears in the following Collection(s)

Show simple item record