Thermal decomposition of azomethane
dc.contributor.author
Steel, Colin
en
dc.date.accessioned
2019-02-15T14:23:13Z
dc.date.available
2019-02-15T14:23:13Z
dc.date.issued
1958
dc.description.abstract
en
dc.description.abstract
The thermal decomposition of azomethane alone and in the presence of
added gases has been reinvestigated in a static reaction system to see if
the reaction could still be regarded as a true unimolecular reaction and,
as such, used to test the detailed theories of unimolecular reactions and
to obtain information about the efficiencies of added gases in energy
transfers with the reactant molecules.
The reaction was followed in the temperature and pressure ranges (502 -
593°K) and (0.2 - 975 mm.) by measurement of the nitrogen which was produced
by the primary reaction
CH₃N=NCH₃ --> CH₃ + N₂ + CH₃
As predicted by theory, the experimental first -order rate constant and
the activation energy both fall away from their high -pressure values with
decreasing pressure. However, work with toluene and propylene as added
gases showed that the reaction is complicated by a short chain process.
A possible mechanism for the chain decomposition of azomethane is discussed
and suggestions are made as to how this may be verified by experiment.
These chains account for about 50 per cent of the reaction at higher
pressures, but they can be entirely inhibited by the presence of excess
propylene. The rate constants for the fully inhibited reaction are given
by
k∞ = 10¹⁵.⁷ exp (-51,200/RT) sec.⁻¹
Surface reaction was eliminated by seasoning the reaction vessel with allyl
bromide.
Because of the complexity of the reaction the interpretation of the
rate /pressure and activation -energy /pressure curves as a detailed test of
unimolecular theory is doubtful but the indications are that these can
only be accounted for by the quasi- unimolecular nature of the reaction.
There are four current theories of unimolecular reactions which are
chiefly associated with the names of Hinshelwood, Kassel, Eyring and Slater.
Little attention has been paid in the past to treating these theories as
a whole. In this thesis the particular theories are developed from
general arguments and then compared. In particular, the dependence of
the first -order rate constant and the activation energy on pressure is
noted. The significance of the experimental activation energies and
frequency factors in terms of the theories is discussed in detail. In
general, the high- pressure activation energy should be equal to the bond
dissociation energy of the rupturing bond and the high- pressure frequency
factor should lie within the range of molecular vibration frequencies.
However, there is an important exception: if reaction involves the
simultaneous rupture of more than one bond then the high- pressure
activation energy is not necessarily related to the dissociation energies
of the bonds in a simple manner and the high- pressure frequency factor
is greater than normal.
The previous work on the thermal and photochemical decomposition of
azomethane and some of the more reliable work on energy transfer in other
systems are also summarised.
en
dc.identifier.uri
http://hdl.handle.net/1842/34077
dc.publisher
The University of Edinburgh
en
dc.relation.ispartof
Annexe Thesis Digitisation Project 2019 Block 22
en
dc.relation.isreferencedby
en
dc.title
Thermal decomposition of azomethane
en
dc.type
Thesis or Dissertation
en
dc.type.qualificationlevel
Doctoral
en
dc.type.qualificationname
PhD Doctor of Philosophy
en
Files
Original bundle
1 - 1 of 1
- Name:
- SteelC_1958redux.pdf
- Size:
- 16.57 MB
- Format:
- Adobe Portable Document Format
This item appears in the following Collection(s)

