Development and fluid dynamic evaluation of novel circulating fluidised bed elements for low-temperature adsorption based carbon capture processes

Abstract

A methodology for the thermodynamic-kinetic evaluation of circulating systems as TSA carbon capture processes is developed and used in the assessment of a novel CFB configuration against a benchmark (co-current riser). The novel CFB features a counter-current adsorber, a counter-current regenerator and a riser, the latter element playing a double role of solids conveyer and co-current adsorber. The advantages sought by using a counter-current adsorber are not only the more efficient gas-solid contact mode with respect co-current, but also a low pressure drop derived from operation at lower gas velocities and hydrostatic head partially supported on the contactor internals. Knowledge of the adsorption equilibrium alone is sufficient to realise the much higher sorbent circulation rates required by co-current configurations –compared to counter-current– to meet the stringent carbon capture specifications of 90% recovery and 95% purity. Higher solids circulation rates imply higher energy requirements for regeneration, and therefore research and development of co-current gas-solid contactors cannot be justified in terms of searching for energy-efficient post-combustion carbon capture processes. Parallel experimental investigation in the operation and fluid dynamics of cold model CFB rigs is carried out with the purposes of: 1) providing information that may impact the process performance and can be fed into the mathematical model used in the theoretical assessment for more realistic evaluation, and 2) determine gas and solids residence time distributions (RTDs), which are used for the estimation of axial dispersion and comparison with published results in similar systems. Gas RTD data is generated using a tracer pulse injection-detection technique, whereas RTD for the solid phase is studied using positron emission particle tracking (PEPT). The PEPT technique proved to be adequate for the identification of flow regimes in the novel design of the counter-current adsorber, featuring inclined orifice trays. At low gas velocities the particles flow straight down through the tray holes, whereas at higher velocities the particles flow down in zig-zag, increasing the residence time of the particles and reducing the particle axial dispersion, both beneficial in terms of separation efficiency.