Jahn, Wolfram

Rein, Guillermo

Torero, Jose L

2008-08-04T08:27:19Z

2008-08-04T08:27:19Z

2007-10-14

Chapter 11 in the book: The Dalmarnock Fire Tests: Experiments and Modelling, Edited by G. Rein, C. Abecassis Empis and R. Carvel, Published by the School of Engineering and Electronics, University of Edinburgh, 2007. ISBN 978-0-9557497-0-4

This work shows that reproducing fire behaviour of a full-scale enclosure on a detailed level using CFD simulations is possible to certain degree but is a very challenging task. A posteriori (ie after the test) numerical simulations of the growth phase of Test One have been conducted while having full access to all the measurements, including temperature, smoke and flow data, camera footage and photographs, plus detailed information of the fuel load composition, geometry lay out and ventilation conditions. The more measurements are available, the lower the number of degrees of freedom of the model, and the harder is it reach good agreement to the measurements to a satisfactorily level. General fire behaviour such as average hot layer temperature evolution could be predicted with good agreement and less effort, but more detailed comparison, like thermal layering or flame location, demanded a great number of ill-defined parameters being adjusted and a large number of exploratory simulations run. A good agreement on most measurements could not be achieved.

1164963 bytes

application/pdf

W. Jahn, G. Rein, J.L. Torero, Posteriori Modelling of Fire Test One, Chapter 11, The Dalmarnock Fire Tests: Experiments and Modelling, Edited by G. Rein, C. Abecassis Empis and R. Carvel, Published by the School of Engineering and Electronics, University of Edinburgh, 2007. ISBN 978-0-9557497-0-4

978-0-9557497-0-4

http://hdl.handle.net/1842/2404

en

The University of Edinburgh

The Dalmarnock Fire Tests: Experiments and Modelling

Chapter 11, Posteriori Modelling of Fire Test One

Dalmarnock

Modelling

Posteriori Modelling of Fire Test One

Book Chapter