Microwave system development for wireless communications and liquid level determination inside metallic pipes for oil and gas wells
dc.contributor.advisor
Podilchak, Symon
dc.contributor.advisor
Thompson, John
dc.contributor.author
Kossenas, Konstantinos
dc.date.accessioned
2022-11-24T16:28:57Z
dc.date.available
2022-11-24T16:28:57Z
dc.date.issued
2022-11-24
dc.description.abstract
A classic wireless propagation system between a transmitter and a receiver is well defined
in the literature. One propagation scenario not very well researched is within enclosed
environments such as pipes, tunnels, or mines. To explore such topics, the research in
this thesis examined the theoretical modelling, design, implementation, and test of two
different RF/microwave systems for applications within oil and gas wells. In particular, one system developed communications within a circular metallic pipeline, and the
other was the liquid level determination of the crude by considering electromagnetic
propagation within coaxial pipelines. The transceivers for those systems were placed
into conventional circular and coaxial metallic pipes prevalent within real-world oil and
gas well systems. Project work collaborated with The Oil and Gas Innovation Centre
(OGIC) and Innerpath Technologies Ltd., both situated within Aberdeen, UK.
An original feasibility study was first developed where the well was modelled as a
circular aluminium pipe and then considered an overmoded pipeline when treated like
a microwave waveguide for the communication system. This is not conventional as typical microwave waveguide systems try to ensure unimodal operation over the required
frequency range. Regardless, pipe testing was completed by considering commercially
available oil and gas well pipelines, and as the transceivers, half-wave dipoles operating at 2.5 GHz were employed. Due to this excitation technique and the enclosed
environment, parameters such as the propagating mode, the directivity, and the realized effective gain of the antennas also needed to be studied for this scenario. This
brought new findings to the antennas and propagation research communities. Additionally, a numerical transmission path loss (TPL) model was developed and verified
using full-wave simulations and lab measurements. Sensory data, including temperature and pressure within the pipe, were then transmitted using N210 universal software
radio peripheral (USRP) modems by National Instruments and coded using orthogonal
frequency-division multiplexing (OFDM). Since this initial study was experimentally
verified and successful, a more advanced transceiver and mechanical antenna housing
was designed and measured, which is even more realistic for industrial oil and gas well
pipelines. In particular, compact PCB-based end- re antennas were designed for signal
propagation within a circular pipeline considering corroded carbon steel. A specific link
budget was also developed for this S-band transmission system and measured successfully using a 36 meter carbon steel pipeline, which could have been easily extended to
more than 150 meters. Also, based on the measured system data, the receiver sensitivity was -77 dBm and 15 dB in terms of the signal-to-noise ratio (SNR). Additionally,
some digitized images and live videos were successfully transmitted and monitored in
real-time using the N210 USRP modems. The employed antenna and its protective RFi
mechanical housing were also designed to be positioned within a mandrel for protection
from possible gaseousflow and the filling material within the pipeline. Such a system
could be adopted for industry-standard oil and gas wells. In terms of the RF/microwave
liquid level determination system, the position of the crude was determined by measuring the time delay between the original signal and the reflected one from the liquid layer
positioned at the bottom of the well. To conform to standard pipeline dimensions, the
propagating mode was selected as a superposition of the TE21 and the TE31 modes,
which again is not standard. Theory, full-wave simulations, and measurements verified
the wave velocity for the generator signal and the propagation within the guide. Then,
the transmission signals were selected as Gaussian and rectangular pulses. A dedicated
link budget was also developed for the 2.4 GHz microwave system and measured successfully in the lab using a carbon steel pipeline. Based on these initial experiments,
the maximum investigation depth for the proposed system can be 250 meters when
the stimulating power is 1 kW. All these electromagnetic transmission studies realizing
antenna-driven propagation were supported by theory, full-wave simulations, as well as
system-level measurements, which approached high levels of technical readiness.
en
dc.identifier.uri
https://hdl.handle.net/1842/39525
dc.identifier.uri
http://dx.doi.org/10.7488/era/2775
dc.language.iso
en
en
dc.publisher
The University of Edinburgh
en
dc.relation.hasversion
K. Kossenas, S. K. Podilchak and M. Beveridge, "Wireless Propagation in a Metallic Pipe for the Transmission of Sensory Oil and Gas Well Data," in IEEE Antennas and Wireless Propagation Letters, vol. 21, no. 6, pp. 1124-1128, June 2022
en
dc.relation.hasversion
K. Kossenas, S. K. Podilchak and M. Beveridge, "A Microwave Liquid Level Determination Method for Oil and Gas Pipelines," in IEEE Access, vol. 10, pp. 67031-67046, 2022
en
dc.relation.hasversion
K. Kossenas et al., "A Methodology for Remote Microwave Sterilization Ap plicable to the Coronavirus and Other Pathogens Using Retrodirective Antenna Arrays," in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology, vol. 6, no. 1, pp. 41-51, March 2022
en
dc.relation.hasversion
. K. Kossenas, S. K. Podilchak and M. Beveridge, "RF System Development for Sensor and Wireless Communication Applications Inside a Circular Pipe," 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, 2020, pp. 1143-1144.
en
dc.relation.hasversion
K. Kossenas, D. Comite, S. N. Daskalakis, P. Kontou, M. Kuznetcov, and S. K. Podilchak, "A Remote Microwave Thermal Sterilization Approach for the Coronavirus and Other Pathogens by Wireless Power Transmission," URSI GASS 2021
en
dc.relation.hasversion
K. Kossenas, M. V. Kuznetcov, D. Comite and S. K. Podilchak, "Remote Destruction of the Coronavirus by Dual-Polarized Wireless Power Transmission," 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS/URSI), 2021, pp. 459-460
en
dc.relation.hasversion
M. V. Kuznetcov, K. Kossenas et al. "Remote Microwave Sterilization Applicable to Coronavirus Using a Van-Atta Retrodirective Antenna Array with 2-D Tracking Capability," 2021 51st European Microwave Conference (EuMC)
en
dc.subject
real-time monitoring
en
dc.subject
pipeline condition
en
dc.subject
sensory information collection
en
dc.subject
data exchange
en
dc.subject
liquid level determination
en
dc.subject
microwave systems
en
dc.subject
antenna selection
en
dc.subject
high-speed wireless
en
dc.subject
gas well pipelines
en
dc.title
Microwave system development for wireless communications and liquid level determination inside metallic pipes for oil and gas wells
en
dc.type
Thesis or Dissertation
en
dc.type.qualificationlevel
Doctoral
en
dc.type.qualificationname
PhD Doctor of Philosophy
en
Files
Original bundle
1 - 1 of 1
- Name:
- Kossenas2022.pdf
- Size:
- 19.18 MB
- Format:
- Adobe Portable Document Format
- Description:
This item appears in the following Collection(s)

